Architecture

The development comprises two buildings defined by an organic, curvilinear form, rising to a maximum height of 16 storeys. The scheme delivers 456 residential units, including one-, two- and three-bedroom apartments, duplexes and penthouses, many with private garden spaces. Ground- and first-floor commercial areas provide approximately 1,300 m² of flexible retail and commercial accommodation.

With a flexible team of 10—40 architects, engineers, and technicians, we coordinated project delivery using custom tools developed on previous large-scale projects. Direct access to the project’s cloud-based PIM system enabled efficient instruction management, consultant coordination, and issue of deliverables, while structured documentation and scheduling supported effective change control.

Our areas of focus included architectural, façade, structural and MEP modelling, architectural and MEP design development and construction documentation up to LOD 300, and services coordination and clash detection.

By completion, we delivered a fully coordinated tender and construction documentation package, including over 2,000 architectural and 1,300 MEP drawings.

Collaborating with the client during planning, detailed design, tender and construction stages, we worked strictly to their BIM execution plan, linking structural and MEP models for coordination at regular intervals throughout the design. We were also involved in developing design options for individual purchaser variations whilst maintaining the original programme and deliverables. These changes were integrated into the construction documentation once approved.

The project involves a mixed-tenure residential development of 110 units across two 3 – 4-storey buildings. An additional layer of complexity was introduced in the design by the requirement to integrate specialist disability accommodation design standards across selected apartments.

Using a flexible resourcing model and collaborating closely with the architects’ teams, we produced the trade package of drawings in four months and the construction documentation comprising 580 drawings in 6 months.

Team members were seconded to work full-time within the client’s project office, operating as an embedded extension of the project team and supported by a dedicated delivery team based in our operations centre.

Our on-site expat team supported the project through the design phase and into the post-contract shop drawing stage, coordinating building services and site equipment fixings with internal panels and façade systems. Delivery was governed by strict documentation protocols, with all instructions and RFIs managed in accordance with the project’s BIM Execution Plan.

Atlas provided architectural Revit support across several project areas within the development from preliminary design to detailed design, ensuring clear and accurate documentation while coordinating between structural, architectural, and building services. We also prepared detailed presentation drawings that helped stakeholders visualise design outcomes and secure approvals with confidence.

Our flexible delivery model allowed the client to scale our involvement in line with project demands. With expertise in both technical documentation and 3D visualisation, we provided responsive support that streamlined coordination, accelerated stakeholder engagement, and contributed to the successful delivery of the terminal upgrade.

Delivery was undertaken within the client’s BIM 360 Collaborative Work Environment (Autodesk Construction Cloud), in strict accordance with established Revit modelling procedures, protocols, and standards. A Project Execution Plan was developed at project commencement to define workflows, governance, and ongoing monitoring processes.

The scope included architectural design development documentation in Revit, review and coordination of embedded services and structural drawings, and daily model reviews. A well-established client project team worked in close collaboration with our team on a daily basis, ensuring seamless integration and continuity of delivery.

Through partnering with us, the client not only met their demanding programme, but our BIM expertise helped them gain recognition as a lead design consultant capable of delivering complex and large-scale BIM projects.

The 300,000 m² mixed-use development includes a five-star luxury lifestyle, hospitality and leisure precinct with 400-key hotel, food and beverage and leisure amenities, luxury villas, a freehold residential tower, a retail and family entertainment and dining precinct, and 200+ berth marina with exclusive members-only luxury facilities.

The project required precise coordination and high-detail modelling to meet the rigorous standards of a cutting-edge research environment. Our contribution ensured accurate  documentation, supporting both design development and efficient construction delivery.

To enhance flexibility and streamline the development of the façade and window schedules, inherited grouped façades were replaced with Revit window system families. These included parameters for spandrel and window heights, materials, module counts, locations, and louvre operations—enabling efficient exploration of design options and accurate scheduling for every element.

This approach produced detailed, adaptable models for our client that improved coordination, supported informed decision-making, and ensured high-quality documentation for construction delivery.

Working closely with the client, our team produced a total of 332 detailed developed design drawings for a 437 m² multipurpose building and two teaching and learning buildings of 541 m² and 482 m², ensuring accurate, coordinated documentation to support the next stages of project delivery.

MEP services covered design development, analysis and documentation, supported by BIM coordination through detailed design and construction. Structural services included design analysis, documentation and BIM support across detailed design, tender and construction phases. The architectural scope included Revit-based design and documentation, BIM coordination, detailed design, and tender and construction documentation.

The project comprises two new teaching and learning academies delivering education from pre-school through to the completion of secondary school. Each campus includes specialist teaching spaces, administration buildings, a community recreation centre and theatre, a 50-metre Olympic-standard swimming pool, and a dedicated energy and facilities management centre.

The fifteen-storey health education and research building provides co-working, education, training and research spaces, clinical schools, ambulatory care clinics, support facilities, retail, and over 2,500 m² of publicly accessible open space.

Our work involved the shell and core, healthcare planning, and interior fit-out. During the complex value management phase our additional delivery capacity enabled the design consortium to remain focused on client engagement, resolving design challenges, and coordinating consultants.

One of Australia’s largest and most technologically advanced tertiary teaching hospitals, the facility delivers comprehensive healthcare services for adults, youth and children. The development comprises eight buildings and includes a 783-bed hospital, clinical research and teaching facilities, a rehabilitation centre, outdoor courtyards, extensive landscaping, and a dedicated paediatric playground.

We partnered with our client on several phases of the project with initial work comprising PDF-to-BIM services, followed by the preparation of architectural concept design drawings and presentation renders for stakeholder approval. The scope then extended through building consent, tender and construction documentation stages. During construction, additional support was provided through the production of clarification responses and supplementary documentation as required by the contractor.

We developed a new LOD 300 architectural Revit model using the client’s revised template and incorporated all key design changes to reflect the current requirements. To support the next stage of design development we also produced 2D and 3D detailed design stage drawings. This gave the client a reliable and fully coordinated BIM model to progress the design of their new data centre.

We provided full architectural, structural, MEP, and civil documentation services, working in close coordination with the client’s team. By leveraging the time-zone difference, we ensured near-24/7 progress on the documentation, delivering the test-fit package efficiently, below budget, and on schedule, giving the client a clear and reliable basis to plan the next stage of their development.

We delivered the project through to 100% design development at LOD 300 and full construction documentation at LOD 350. The development comprises a high-rise, multi-unit residential scheme with two towers and a shared podium, delivering 260 apartments alongside communal amenities, basement parking, and ground-level retail space.

Our civil team alone contributed to the completion of more than 2,000 as-constructed drawings and 75 LOD 300 models incorporating roadways, footpaths, car park, utilities, retaining walls, fencing and barriers. As-constructed drawings were validated against models using as-built surveys, and updated asset tags for the constructed civil elements.

The work was performed using 12D, OpenRoads, Revit, Tekla, AutoCAD and Civil3D software, and throughout the project we developed custom BIM tools to support efficient production of more than 1,000 drawings per month, meeting all rigid documentation protocols. At completion we supplied a final asset information model (AIM) with all relevant model data.

The project comprises new stations, structures including road-over-rail bridges, sections of elevated viaduct, bridge and rail tunnel portal.

By using our services, the client’s team could focus on design development challenges, the User Group Review process, and coordination and management of the main contractor and consultants.

Working from a schematic design–stage Revit model, along with CAD files, project imagery, and consultant DWG and model inputs, the team delivered architectural modelling and documentation across the concept design, schematic design, detailed design, and tender documentation stages.

In addition, we supported the client with design coordination, including VS, interior design, MEP, and structural.

The scope included demolition, concrete profile and room layout packages, FF&E, and site fire egress drawings. In parallel, we supported time-critical tasks to maintain programme momentum while the client’s team managed site inspections and consultant coordination.

A flexible team of architects and technicians, highly experienced in Revit modelling and documentation, worked closely with the client to meet the intensive programme and ensure timely delivery of all project documentation.

Our team delivered a complete Revit model alongside a full set of design development documentation. We also supported design coordination across VS, interior design, MEP, and structural disciplines throughout the programme.

By leveraging time zone differences with the client’s team, we enabled seamless collaboration and near 24-hour production of presentation-ready design drawings, supporting an accelerated programme.

The project involves a new state-of-the-art paediatric services building, comprising medical and surgical units, perioperative services, PICU and NICU, family-focused retreat areas and accommodation, front-of-house and retail amenities, logistics facilities, car parking, and a public domain with associated landscaping.

The project involves a new 12-storey clinical services building, a bigger emergency department, and modern centrally located mental health units. Facilities include new operating theatres, intensive care unit, women’s health services, increased access to cancer, outpatient and ambulatory care services and new nuclear medicine and dental services.

In parallel, we supported health planning by helping the client’s team identify and resolve design challenges early in the process. Architectural documentation support was provided throughout the design development and construction stages of the facility which provides specialist care for patients with spinal cord injuries and acquired brain injuries, as well as rehabilitation following stroke, neurological disease and amputations.

Our focus was the delivery of the architectural shell and core drawings for construction in accordance with the Fiona Stanley Hospital site drawing standards.

By relying on our team to produce exactly what was required, our client was able to focus on other key design challenges and coordinating with the rest of the design collaboration team.

The project involved several hundred apartments of  mixed typology across multiple buildings.

The large residential-led mixed-use development includes a combination of commercial spaces and several hundred apartments across four buildings.

The project comprises a 50,000 m² mixed-use development across two buildings rising to 33 storeys, delivering residential apartments of mixed typology alongside light industrial space and flexible commercial uses.

Working from existing 2D CAD files, we developed architectural Revit models to LOD 200 and progressed them to LOD 300, producing approximately 1,200 high-quality drawings to support RIBA Stage 3 and Stage 4 delivery.

The project forms part of a residential-led development and relates to one of three towers, rising to 42 storeys and delivering 333 private and affordable apartments within a total floor area of 38,000 m².

Engaged during RIBA Stages 3 and 4 we provided architectural Revit modelling and documentation services to help progress the updated scheme and deliver the required drawing packages, ensuring the expanded proposal advanced smoothly through planning resubmission while maintaining design intent.

We updated the models to reflect the changes to the building massing and reproduced the drawings for the revised planning submission.

During the collaboration we identified design issues and proposed solutions, rationalised the apartment layouts, and highlighted concerns regarding planning or coordination.

Architectural and interior design documentation was delivered across detailed design, tender and IFC stages along with ADM and IFC submissions.

Our structural team delivered full design and documentation services, including structural analysis, load calculations, reinforcement detailing, and reporting. MEP design and documentation were provided across all buildings, basements, substations, and retail spaces with design development stage models developed to LOD 300.

Through advanced Revit modelling and proactive multidisciplinary BIM coordination, we minimised inter-discipline clashes, enabling accurate, high-speed delivery. Our integrated approach ensured the project was completed on programme and well below anticipated costs.

Our scope included the delivery of architectural and interior design construction documentation for 158 luxury residences across five apartment types within a highly compressed timeline.

Services spanned from development application through to design development and construction certificate stages, with technical leadership supporting the coordination of this complex multi-tower project. Close collaboration with the client’s in-house design team enabled the delivery of more than 1,000 coordinated BIM drawings, while automated digital workflows for drawing production, quality control and progress reporting drove efficiencies and supported evolving marketing and sales requirements.

The project comprises a 39-storey tower accommodating two distinct hotel brands, requiring a coordinated and efficient documentation approach to support construction.

Working from supplied CAD and PDF elevations, we updated the Revit model and selected drawings to reflect revised floor-to-floor heights. Additional modelling and documentation were delivered for the substation, external stair and ramp, along with a series of bay elevation drawings developed in line with the client’s reference standards.

We assisted the client with coordination across architectural, interior design, structural and building services disciplines, as well as converting an ArchiCAD interior model supplied by the interior designer into Revit. In total, we produced 191 high-quality coordinated drawings.

The mass rapid transit (MRT) project includes two stations, one an interchange, and the world’s first integrated four-in-one depot facility with stacked 3-level rail depot, stabling yards, workshops and multi-level bus depot.

The scope covered pre-design development and design development stages, with architectural Revit models developed to LOD 350. We adapted client-supplied Revit Families to suit the specific needs of each station and produced detailed door schedules.

To support close collaboration with the delivery team, several of our team were seconded to the client’s project office for an extended period.

Support was provided through to the completion of IFC documentation, contributing to a coordinated and construction-ready design outcome.

The model was developed through RIBA Stage 3 and Stage 4 to produce the required tender and construction drawings, providing accurate and coordinated documentation to guide the remediation works.

Leveraging extensive UK project experience, we applied a detailed understanding of local building regulations and codes to efficiently produce compliant, construction-ready documentation.

Working from supplied RIBA Stage 3 CAD drawings, we developed a LOD 300 architectural Revit model and produced the RIBA Stage 4 fit-out documentation packages within a BIM360 environment.

The project is a mixed-use development with more than 400 residential apartments, alongside commercial and retail spaces.

Architectural elements were developed to LOD 300, while structural and MEP components were modelled for the influent pumping station and associated areas, supporting coordinated design and efficient delivery of the works.

Our role included architectural tender documentation as well as FF&E modelling and documentation, all produced to the client’s established graphic standards. In total, we delivered more than 750 drawings within a demanding programme, helping the client meet critical deadlines with confidence.

Throughout the project, we worked directly with the client within a shared BIM cloud environment, enabling efficient collaboration, coordination and model development.

The scope included the production of ID reference series drawings, room data sheets, construction details, and schedules. In total, approximately 400 construction drawings were delivered, alongside model auditing, status reporting, and additional support for scheduling and manufacturer information and modelling.

Working in Revit across all disciplines, with Plant 3D used for MEP services, the team developed accurate as-built drawings and models from hundreds of issued-for-construction 2D drawings, 3D models, redline mark-ups and survey data. Delivered over an approximately 15-month period, the coordinated digital outputs provided a reliable foundation to support planning, coordination and delivery of the facility upgrades.

We developed a detailed BIM model of the proposed midfield concourse, incorporating surrounding context to accurately represent scale, interfaces, and site conditions. Building on this, we produced a three-minute 3D animation that showcased key design elements, spatial planning, and construction sequencing. Together, these services enabled stakeholders to clearly understand the proposed development, assess design intent, and confidently communicate the project vision during the competitive bid phase.

The scope included architectural building elements, façade and interior design models to LOD 300, alongside an LOD 300 MEP model.

To support seamless integration with the client’s team, a dedicated team member was seconded to the client’s office during the schematic design stage. This close collaboration enabled a deep understanding of the project’s design intent, ensuring accurate, coordinated documentation and a smooth transition through subsequent delivery stages.

A flexible resourcing model was adopted, with a core team of five to seven professionals scaled to meet changing project demands. This approach enabled rapid mobilisation, consistent output, and timely delivery as the project progressed through critical design stages.

The project comprises a four-level office building incorporating retail, office, and food and beverage uses, alongside a separate five-level car park structure. Timely, well-coordinated documentation played a critical role in maintaining momentum across the construction phase.

Developed from 2D CAD information, the integrated Revit model was produced by a multidisciplinary team within a four-week programme, resolving clashes and construction challenges as the design progressed.

The coordinated BIM models were used by the main contractor during construction, while a millimetre-accurate point cloud survey informed a data-rich as-built model for digital walk-throughs and ongoing asset management. In parallel, we provided BIM training to AAHK teams in Hong Kong and Vietnam, helping build internal capability for the wider Three Runway System expansion programme.

Their goal was to propose a construction solution that could be fabricated off-site and built with minimum disruption to the adjoining hospital and surrounding park environment.

Using our BIM model, we deconstructed and rebuilt the design, rationalising it into regular components suitable for efficient off-site fabrication. To support the competition evaluation, we created walk-thru animations and an immersive augmented reality experience, allowing the judging panel to fully understand the proposed construction solution. We also produced detailed fabrication drawings for the steel manufacturer.

As a result, the client reduced construction costs by approximately 21% and clearly demonstrated the commercial viability of their proposal.